Kentrox AI232 manual Useradd, Profilename Permission

AI232 Version 9.6x User’s Guide

AI232 Commands: useradd

useradd

Description

This command adds a username and password. When the user first logs into AI232, the login name and password are both ai by default. Five grace logins are available before a username and password must be configured. A total of ten users can be added to the database.

Command Type

shell

Formats

useradd [ -profile_name ] [ username ]

Parameters

profile_name	Assigns a permission to a username. Table 8-3 describes the
	permissions. The default permission is supervisor.
username	Defines the login name for a user (up to 8 characters). After
	entering a username, a prompt appears that asks for a password
	(up to 10 characters).
	Table 8-3 Description of Permissions
profile_name	Permission
supervisor	Specifies a user who can execute all commands on the system. At
	least one supervisor permission must be configured. The system
	will not allow the deletion of the only supervisor user. The default
	permission is supervisor.
mgmt	Specifies a user who can execute all commands except for
	useradd.

8-119