Kentrox AI232 manual TCP Settings, Toggle, To on

AI232 Version 9.6x User’s Guide

System Configuration: General System Properties Configuration

TCP Settings

Description

The TCP settings are configured using two menu items. The configurable values are:

zTCP default window size—Sets the TCP default window size for AI232. The window size specifies how many bytes AI232 will send to another device or how many bytes another device may send to the AI232 before receiving an acknowledgement.



Note: A small default window size way slow transfers to and from AI232.

zTCP send ahead—Enables or disables AI232’s ability to send a TCP window without requiring an acknowledgment. When enabled, acknowledgment is not required. When disabled, acknowledgment is required.

Menu Item Type

Toggle

Configuration in the AI198 Menu System

1.Access System Menu 4.2.14.

2.For 06*TCP Default Window Size, enter 6 to select 200, 512, 1024, or 2048. The default

is 200.

3.For 07*TCP Send Ahead, enter 7 to select OFF or ON. The default is OFF.

This example displays 06*TCP Default Window Size set to 1024 and 07*TCP Send Ahead set

to ON.

>7
		Menu 4.2.14 pg 1
01	IP Address (0.0.0.0 - 255.255.255.254)-----------------------	010.040.057.012
02	IP Address Range (1 - 255)-----------------------------------------------	001
03	IP Subnet Mask (0.0.0.1 - 255.255.255.254) ------------------	255.255.000.000
04	Primary IP Router Address (0.0.0.0 - 255.255.255.254) -------	010.040.000.001
05	Secondary IP Router Address (0.0.0.0 - 255.255.255.254) -----	000.000.000.000
06*TCP Default Window Size (200, 512, 1024, 2048)--------------------------		1024
07*TCP Send Ahead-----------------------------------------------------------		ON

Configuration in the AI232 Local Menu System

1.Access the System Menu.

2.For TCP Default Window Size, select 200, 512, 1024, or 2048. The default is 200.

3.For TCP Send Ahead, select Enabled or Disabled. The default is Disabled.

4-9