AI232 Version 9.6x User’s Guide

Alias and Call Routing Configuration: Call Routing

5.To access menu 02+Simple alias translation, enter 2. Menu 8.2 appears:

>2

Menu 8.2

01 Simple alias translation

02 Multiplexed connection

03 Multiplexed only translation

04 SLC routing translation

21 Exit this menu with no changes

Enter item number and optional ",value" then push <CR> key

>

6.To select 04 SLC routing translation, enter 4. Menu 8 reappears with the SLC routing translation configuration items.

Important: Menu item 04 SLC routing translation is the only valid menu item for AI232. Use SLC routing translations to route calls through cards that support non-time division subchannel (TDS) connections.

7.(optional) If you are routing calls between two AI232 cards, enter 3, and the IP address of the remote AI232.

8.For 04 Called address -, enter 4, and the the called (destination) address.

The called (destination) address defines the IP address to contact. Maximum length is 14 characters. The actual IP address or an alias macro can be entered here.

9.For 05 This alias is visible in the destination menu, enter 5 to toggle between Yes

and No.

This setting specifies if the alias will appear in the welcome screen.

10.(optional) For 08 Call data -, enter 8, and the call user data.

Call data is dependent on the type of SLC being used. It may be directly entered as an alias macro.

7-6

Page 152
Image 152
Kentrox manual AI232 Version 9.6x User’s Guide