Kentrox AI232 manual Displays the number of frames received on the connection

AI232 Version 9.6x User’s Guide

AI232 Commands: diag-info

This example displays diagnostic information for the Ethernet sonic chip in use on this card (SONIC0), which is accessed by typing E.

		SONIC0
frames_received	2133706	2451073
bytes_received	204088549	233809600
frames_sent	317511
bytes_sent	38293966	0
collisions	116	0
transmit_errors	0	0
crc_errors	0	0
alignment_errors	0	0
missed_packets	0	0
rx_buffers_exhausted	0	0
heartbeatlost	0	0
rx_overruns	0	0
rba_exceeded	0	0
current_tda	8
ex_defers	0	0
ex_coll	0	0
tx_underruns	0	0
bad_tx_size	0	0
tx_blocked	0	2451086
tx_delayed	0	0
state	2	2451086
eth intr stuck: 0----------------233812081

Display Item	Description
frames_received	Displays the number of frames received on the connection.
bytes_received	Displays the number of bytes received on the connection.
	
	Note: This field displays a negative number after it reaches
	a count of 2,147,483,647. This is normal operation
	and does not indicate an error.
frames_sent	Displays the number of frames sent from the connection.
bytes_sent	Displays the number of bytes sent from the connection.
	
	Note: This field displays a negative number after it reaches
	a count of 2,147,483,647. This is normal operation
	and does not indicate an error.
collisions	Displays the number of transmit collisions. This is the
	number of times the Ethernet device goes to transmit but
	cannot because someone else is already transmitting.
transmit_errors	Displays the number of transmit errors that have occurred.

8-49