Kentrox AI232 manual Call Routing, Configuring an Alias in the AI198 Menu System

AI232 Version 9.6x User’s Guide

Alias and Call Routing Configuration: Call Routing

Call Routing

To route calls within AI232, an alias must be configured according to the source protocol and the destination protocol.



Note: Aliases created in AI198 are not visible to AI232 when it is running in standalone mode. However, you can configure aliases in the AI232 local menu system when it is in standalone mode.

Configuring an Alias

To route calls with AI232, you must configure an alias for a source and destination protocol. The following procedure takes you through the configuration of an alias name on a single AI232 card and between two AI232 cards.



Note: Specific configuration information about menu items in the following procedures is located in sections Source/Destination Protocol Tables for the AI198 Menu System on page 7-10 and Source/Destination Protocol Tables for the AI232 Menu System on page 7-12.

Configuring an Alias in the AI198 Menu System

To configure an alias in the AI198 Menu System:

1.Log in to AI198.

2.At the prompt, type menu. The main menu appears.

7-4