AI232 Version 9.6x User’s Guide
AI232 Commands: diag-info
8-51
This example displays diagnostic information for TCP data, which is accessed by
typing T.
state Displays the current state of the Ethernet interface. The
following values may appear:
z0—The Ethernet interface is uninitialized.
z1—The Ethernet interface is idle.
z2—The Ethernet interface is active.
z3—The Ethernet interface needs to be reset.
eth intr stuck Displays the number of times the Ethernet interface interrupt
has stuck while servicing the interrupt.
T C P / I P I N F O
Copied ethernet receive packet: 0
TCP keepalive failed: 0
TCP max keepalive tries: 1
Dropped SNMP request: 0
Enter M-emory, A-sync, E-thernet, T-cp or Q-uit:
Display Item Description
Copied ethernet receive packet: Displays the number of copied Ethernet receive
packets.
TCP keepalive failed: Displays the number of TCP keep-alive
messages that have been sent and were
expected to be received, but were not received.
TCP max keepalive tries: Displays the maximum number of TCP keep-alive
messages received on the connection.
Dropped SNMP request: Displays the number of dropped SNMP requests.
Display Item Description