Samsung DVD-R155/XEH, DVD-R150/XEH How to use the DVD Recorder, Select the disc type, Recording

Before reading the user’s manual

Make sure to check the following terms before reading the user’s manual.

Icons that will be used in manual

Icon	Term	Definition
		This involves a function available
	DVD	in DVD or DVD-R/DVD-RW(V)/+R
		discs that have been recorded and
		finalised.
	RAM	This involves a function available in
		DVD-RAM.
	-RW	This involves a function available in
		DVD-RW.
	-R	This involves a function available in
		DVD-R.
	+RW	This involves a function available in
		DVD+RW.
	+R	This involves a function available in
		DVD+R.
	CD	This involves a function available in a
		data CD (CD-R or CD-RW).
		This involves a function available in
	JPEG	a data picture CD-R/-RW or DVD-RAM/
		DVD±RW/DVD±R discs.
		This involves a function available in a
	MP3	data CD-R/-RW or DVD-RAM/
		DVD±RW/ DVD±Rdiscs.
		This involves a function available in a
	MPEG4	data CD-R/-RW or DVD-RAM/
		DVD±RW/DVD±R discs.
		This involves a case where a function
	Caution	does not operate or settings may be
		cancelled.
		This involves tips or instructions on
	NOTE	the page that help each function
		operate.
	One-Touch	A function that can be operated by
	button	using only one button.
	ANYKEY	A function that can be operated by
	button	using ANYKEY button.

About the use of this user’s manual

1)Be sure to be familiar with Safety Instructions before using this DVD Recorder. (See pages 2-5)

2)If a problem occurs, check for Troubleshooting. (See pages 70-71.)

Copyright

©2007 Samsung Electronics Co.

All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.

How to use the DVD Recorder

▌Step 1 : Select the disc type

This DVD Recorder can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc.

If you want to save recording without any change, choose a non-rewritable DVD±R.

●DVD-R150

●DVD-R155

▌Step 2 : Format the disc to start recording

The DVD Recorder automatically starts formatting when an unused disc is inserted. This is required for the preparation of recording on a disc.

Using a DVD-RAM

This type of disc can be formatted in DVD-Video Recording format (VR mode). You can edit recorded video and create a playlist and edit video in a specific sequence according to your requirements.

Using a DVD±RW/+R

•When an unused DVD±RW/+R disc is first inserted, the message “Uninitialised Disc. Do you want to initialise this disc?” will be displayed. If you select Yes, initialising will be start. DVD-RW disc can be formatted in either DVD-Video format (Video mode) or DVD-Video Recording format (VR mode)

•With DVD+RW discs have no difference between DVD-Video format (Video mode) and DVD-Video Recording format (VR mode).

Using a DVD-R

Formatting a disc is unnecessary and only Video Mode Recording is supported. You can play this type of discs on various DVD components only when they have been finalised.

■ You can only use either the VR or Video mode on a DVD-RW, but not both at the same time.

■You can change the DVD-RW format to another format by reinitialising. It should be noted that the disc's data will be lost when changing formats.

▌Step 3 : Recording

There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classified as a Date : Once, Daily, MO-SA, MO-FR, W-SA, etc.

Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc.

Getting Started

English - 9