Samsung DVD-R155/XEH, DVD-R150/XEH manual ShowView Extended, DVD-Recorder Programme

DVD-Recorder			Programme
DVD-RW(VR)
Title List	ShowView		►
Playlist	Scheduled Record List		►
Disc Manager	ShowView Extended : Off		►
Programme
Setup
MOVE	OK	RETURN	EXIT

DVD-Recorder				Programme
DVD-RW(VR)
Title List	ShowView				►
Playlist
	Scheduled Record List		Off
Disc Manager	ShowView Extended :		10
			20
Programme			30
Setup			40
			50
			60
MOVE	OK	RETURN		EXIT

ShowView Extended

To prevent delays or over-runs the DVD Recorder has a function called ShowView Extended allowing you to extended the recording time by up to 60 minutes.

• Only use if PDC/VPS is not available or set to OFF.

1.With the unit in Stop mode, press the MENU button.

2.Press the ▲▼ buttons to select Programme, then press the OK or ►button.

3.Press the ▲▼ buttons to select ShowView Extended, then press the OK or ► button.

4.Press the ▲▼ buttons to select the ShowView Extended time, then the press OK or ► button.

5.Press the EXIT button to exit the menu.

Press “On” to confirm EZ REC mode.

Otherwise press “Off”

On Off

Disc Initialise (DVD-V)

Now, initialising..

50%

Disc Finalise

Processing..

50%

EZ REC MODE

DVD-R155 only	Recording
This function allows you Initialise and Finalise a disc automatically.
1. With the unit in Stop mode/No Disc mode, press the EZ REC MODE button
on the remote control.
2. Press the ◄ ► buttons to select On, and then press the OK button.
EZ REC MODE is set up.
3. Insert a disc.
If the disc is new, it will initialise automatically.
4. Press the REC button.
5. EZ REC MODE will Automatically Finalise the disc under the following
conditions.

-When you press the OPEN/CLOSE button on your DVD Recorder after recording on at least 30% of the disc. The tray will open after the disc has been finalised.

-When the disc is full, it will finalise automatically and the Recorder will remain in stop mode.

-When you make a timer recording and it occupies at least 30% of the disc, the disc will finalise automatically and the Recorder will power off.

Please note that auto finalisation will not work if the Recorder has more than one Timer Recording set in the Scheduled Record List.

■ If you insert a new DVD-RW disc, it will be formatted in V mode after auto initialising.

■If you select off, you must initialise (see page 34) and finalise the disc manually in the Disc Manager menu.(see page 68)

■The Length of Recording is different according to recording mode. (see page 35)

English - 43