Samsung DVD-R155/XEH manual Anynet+HDMI-CEC DVD-R155 only, For using Anynet+HDMI-CEC, TV Menu

DVD-Recorder				System
No Disc
Programme	EP Mode Time		: 6 Hours	►
Setup	Chapter Creator		: Off	►
	Quick Recording		: Off	►
	Anynet+(HDMI-CEC)		Off
			On
MOVE	OK	RETURN		EXIT

DVDR

View TV		Z
Select Device		Z
Record		Z
Menu on Device		Z
Device Operation		Z
Receiver	: Off	Z
Setup		Z
Move	Ok
Exit

TV Menu

▌Anynet+(HDMI-CEC) (DVD-R155 only)

Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the DVD Recorder to a SAMSUNG TV using a HDMI Cable. (see page 20) (This is only available with SAMSUNG TVs that support Anynet+.)

1. With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.

2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3. Press the ▲▼ buttons to select System, then press the OK or ► button. System menu will be displayed.

4. Press the ▲▼ buttons to select Anynet+(HDMI-CEC), then press the OK or

►button.

Anynet+(HDMI-CEC) items will be displayed.

5. Press the ▲▼ buttons to select On, then press the OK or ► button.

For using Anynet+(HDMI-CEC)

1. Connect the recorder with a Samsung TV and HDMI cable. (See page 20)

2. Set the Anynet+(HDMI-CEC) to “On” on your DVD Recorder. (see above)

3. Set the Anynet+ function at your TV.

(See the TV instruction manual for more information.)

•You can operate the DVD Recorder by using TV remote control. (TV buttons that

can be used to control the DVD Recorder : ,,,, , and

, buttons, ~ button)

•When you press Anynet+ button on the TV remote control, the OSD to the left will appear.

-Select Device : Use this option to select device.

-Record : Use this option to start recording or stop recording.

-Menu on Device : Same as MENU button on the DVD Recorder remote control.

-Device Operation : Same as ANYKEY button on the DVD Recorder remote control.

■ By pressing the PLAY button of the recorder while watching TV, the TV screen will change to the play screen.

■If you play a DVD when the TV power is off, the TV will power On.

■If you turn the TV off, the DVD Recorder will power off automatically.(When the DVD recorder is recording, it can't be powered off.)

■If you change the HDMI to other sources(Composite, Component, RF... etc) in TV while playing the DVD disc, the DVD Recorder will stop playing. But the DVD Recorder may keep the DVD disc playing depending on navigation that the DVD disc supports.

System Setup

English - 27