Samsung DVD-R150/XEH, DVD-R155/XEH manual Presetting Channels with the Auto Setup function

System Setup

Auto Channel Memory

17%

Stop

Presetting Channels with the Auto Setup function

This feature allows you to manually set the DVD Recorder tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup.

1.With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.

2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3.Press the ▲▼ buttons to select Install, then press the OK or ► button.

4.Press the ▲▼ buttons to select Auto Setup, then press the OK or ► button. The Country Seletion screen is displayed.

5.Press the ▲▼◄ ► buttons to select your “Country”, then press the OK button.

•The DVD Recorder searches for the stations according to a preset preference list corresponding to the country that you have selected.

Refer to following table when selecting your country.

A(Austria)	NL(Netherlands)	S(Sweden)	PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss)	CZ (Czech)
DK(Denmark)	N(Norway)	TR(Turkey)	Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland)	E(Spain)	HU(Hungary)

6.Press the OK button to continue. Channel scan will be started.

■ Press the OK button to stop the Auto Setup.

Manual Setup

PR	CH	Name	Decoder		Edit
01	1	----		Edit
02	---	----		Delete
03	---	----
04	---	----		Swap
05	---	----		----	►
06	---	----	----		►
07	---	----	----		►
	MOVE	OK	RETURN		EXIT

Manual Setup

PR	01
CH	◄ 1 ►
Name	- - - -
Decoder	Off
MFT	---	---
	Done

MOVE OK

Presetting Channels with the Manual Setup function

You can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to remove. You can programme the order of channels.

1.With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.

2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3.Press the ▲▼ buttons to select Install, then press the OK or ► button.

4.Press the ▲▼ buttons to select Manual Setup, then press the OK or ► button.

5.Press the ▲▼ buttons to select a PR(programme) you wish to edit, delete, or swap, then press the OK or ► button.

Select Edit, Delete or Swap using the ▲▼ buttons, then press the OK or ► button.

•Edit : You can add or edit PR(programme). After change PR informations(CH, Name, Decoder, MFT), select Done, then press the OK button.

-CH : Tune the channel using ◄ ► buttons.

-Name : Display station name automatically detected in broadcasting signal. If not detected, you can edit name by using ▲▼◄ ► buttons.

-Decoder : If you set on, you can record scrambled channels using external decoder box.

Before setting on, refer to connecting external decoder box in the page 16.

-MFT : You can tune up the channel frequency better using ◄ ► buttons.

•Delete : the channel information of selected PR(programme) will be removed.

•Swap : You can swap the channel information of two PR(programme). For example, if you wish to swap PR2 and PR5, select swap at PR2, then press the OK button at PR5.

English - 24