GE 164D3333P033, 49-8779 manual How to Set the Oven for Convection Roasting when Using the Probe

For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven.

To change the oven temperature during the Convection Roast cycle, press the CONV. ROAST pad and then press the + or – pad to get the new desired temperature.

How to Set the Oven for Convection Roasting when Using the Probe

Do not lock the oven door with the latch during convection roasting. The latch is used for self-cleaning only.

The display will flash PROBE and the oven control will signal if the probe is inserted into the outlet, but the oven is not programmed for the probe.

	Place the shelf in the lowest position (A). Insert the
1
	probe into the meat.
	Plug the probe into the outlet on the oven wall. Make
2
	sure it is pushed all the way in. Close the oven door.
	Press the PROBE pad.
3
	Press the + or – pad until the desired internal probe
4
	temperature is displayed.
	Press the CONV. ROAST pad.
5
	Press the + or – pad. The last oven set temperature
6
	appears in the display. Continue pressing until the

desired oven temperature is displayed.

When the oven starts to heat, the words CONV ON and the roasting temperature you set will be in the display.

After a few seconds, the words LO PROBE will replace the roasting temperature in the display.

After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

	When the internal temperature of the meat reaches
7
	the number you have set, the probe and the oven

turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the oven.

NOTE:

■If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

■You will hear a fan while cooking with this feature. The fan will stop when the door is opened but the heat will not turn off.

■You can use the timer even though you cannot use

timed oven operations. 29

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service