Using a razor scraper will not damage the surface if the 30° angle is maintained.
Special Care
Be sure to use a new sharp razor scraper. Do not use a dull or nicked blade.
Sugary spillovers (such as jellies, fudge, candy syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances.
| Turn off all surface units affected by the spillover. |
1 | |
| Remove hot pans. |
| Wearing an oven mitt, hold the razor scraper at a |
2 | |
| 30° angle to the cooktop. Scrape the hot spill to a |
| cool area outside the surface unit. |
| With the spill in a cool area, use a dry paper towel to |
3 | |
| remove any excess. Any spillover remaining should |
be left until the surface of the cooktop has cooled. Do not continue to use the soiled surface unit until all of the spillover has been removed. Follow the steps under Heavy soil to continue the cleaning process.
NOTE: If pots with a thin overlay of aluminum, copper or enamel are allowed to boil dry, the overlay may bond with the glass cooktop and leave a black discoloration. This should be removed immediately before heating again or the discoloration may be permanent.
Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service
43
