Auxiliary function
Cancel Audio Warning
Your machine will send out an audio warning when the program comes to an end. If you do not want to hear this buzzing, you need to press the “Cancel Audio Warning” button. The relevant LED will light up when this button is pressed and an audio warning will not be given when the program comes to an end.
CYou can select this function either before or after the program starts.
Warning indicators
CWarning indicators may differ according to the model of your machine.
Child-proof lock
A warning LED will light up as long as the
Filter cleaning
A warning LED will light up to remind filter cleaning after the program finishes.
CIf the filter cleaning warning lights up continuously, please refer to, “Solution suggestions for problems”.
Tank full
A warning LED will light up at the end of the program or when the tank is full with water. The machine stops operating when this warning LED lights up during a program running. To restart the machine, please drain the water in the water tank. Press "Start/Pause/Cancel" button to start the program after you have emptied the water tank. The warning LED goes off and the program resumes operating.
Cleaning the condenser.
It will light up periodically after maximum 5 drying cycles for the purpose of reminding. In this case and after drying, clean as explained in the section “Maintenance and Cleaning”.
Time delay
If you wish to dry your clothes at a later time, thanks to the time delay function, you can delay the program start up to 3 hours, 6 hours or 9 hours.
1. Open the loading door and put the laundry in.
C Make sure that all air outlets are open, door filter is cleaned and the water tank is empty.
2. Set the drying program, temperature, spin speed and, if required, the auxiliary functions.
3. When the time programming button is pressed once, a 3 hour delay is selected and the relevant led lights. When the same button is pressed again, 6 hours; and if pressed once more, 9 hours delay will be selected. If the time programming button is pressed one more time, time delaying function will be cancelled. Set the time delay as you require.
4. Delayed operation of the selected program is started by pressing the "Start/Pause/Cancel" button after selecting the time delay.
C Additional laundry may be loaded / taken out during the time delay period.
Canceling the time delay
If you want to cancel the time delay countdown and start the program:
1.Press “Start/Pause/Cancel” button for about 4 seconds. The “:” in the middle of the screen will stop flashing.
“Start/Pause/Cancel” light will go off and the remaining time on the screen disappears.
2.Press "Start/Pause/Cancel" button to start the program right away.
Starting the Program
1.Press "Start/Pause/Cancel" button to start the program.
2.“Start/Pause/Cancel” button will light up to indicate that the program has started.
14 - EN
