User instructions
OPTIONS (available in all programs except the soak program)
Options must be chosen before closing the door to start the program, or at the end of assisted programming, when the DISPLAY (G) offers the option selection function (button B/C to accept).
If DELAYED START (C) has been set, before the program starts the user may open the door and set one of the other options, or modify the
DELAYED START.
To select the option press (D); to enable/disable it press (E).
Key (D) |
|
| Key (E) | ||
|
|
|
|
|
|
Function |
| Enable |
|
| Disable |
|
|
| |||
EXTRA HYGIENE |
| 1 |
|
| 0 |
|
|
| |||
START DELAY |
| 1>12/1>24 |
|
| 0 |
|
|
|
|
|
|
HALF LOAD |
| upper/lower |
|
| OFF |
|
|
|
|
| |
DETERGENT |
| 3/1 |
|
| NORMAL |
For an option to be confirmed it needs only to appear on the display. Then close the door to start the program, or move on to select another option.
Depending on the model the dishwasher may feature one, some or all of the options listed below.
All the options are disabled at the end of the program.
DELAYED START (depending on model)
Shown on the DISPLAY (G): "Start delay h 0, 1, .....12/24".
The start of the washing program can be set with a delay from 1 to 12/24 hours. This function allows you to set the dishwasher to work at your preferred time of day and avoid having several appliances (washing machine, oven, etc.) in operation simultaneously.
The start delay can only be set in steps of 1 hour. Press key (C) in repetition until you obtain the delay required, then close the door to start or select another option.
When the door is closed the dishwasher performs a prewash, after which the countdown to the starting time begins. The bottom line of the DISPLAY (G) shows "Starting in X h" or "Starting in Y min" (when less than 1 hour is left).
27
