User instructions
Assisted programming (Wizard)
ξPress (D) or (E) in repetition to display the type of dirt on the dishes, on the top line of the DISPLAY (G).
ξPress (B) or (C) to confirm the selection and continue programming.
Choose the type of wash following the procedures described above (D or E to display the selections available, B or C to confirm).
At the end of assisted programming, the DISPLAY (G) shows "Wait please..." and a few seconds later you will be offered the option selection function (button B/C to accept, D/E to reject).
Refer to the "OPTIONS" section to view the possibilities available.
Standard programming
Select "No" (key B) to disable assisted programming and the system will offer the last program performed.
To start this program, simply close the door (buzzer sounds, if enabled).
To select another program, press (B) in repetition until the program required is displayed; to start this program close the door (buzzer sounds, if enabled).
See TABLE OF PROGRAMS on following pages.
At the end of the assisted or standard programming procedure, the programmed duration of the washing cycle, in minutes, appears on the bottom line of the DISPLAY
(G).
ξThe temperature which appears before the program's name indicates its type (e.g. 45° delicate programs, 55° economy, 65° intensive, etc.); the actual temperature is displayed, stage by stage, while washing is in progress.
ξPrograms' duration, temperature and consumption figures are guideline, since they depend on various factors, such as type of load, intake water temperature, room temperature, etc.
22
