Smeg ST1146SE manual Changing The Program, Annulling A Program, End Of Program, User instructions

User instructions

CHANGING THE PROGRAM

To change a program while it is running, proceed as follows:

ξpress key (F) to set the program in pause status;

ξopen the door and select the new program using key (B);

ξclose the door; the changes relating to the new program will appear on the DISPLAY (G).

ANNULLING A PROGRAM

ξTo annul a program while it is running, it must first be interrupted by pressing key (F);

ξthen open the door and press key (B) in repetition until you obtain "Cancel program";

ξclose the door. "Draining" will appear on the DISPLAY (G) and the dishwasher will start to pump out the water. This will be completed in about 1 minute and "Program end" will appear on the top line of the display.

Before the door is closed, a long washing time will appear alongside "Draining". This is not a malfunction but simply a stage in the time update process; the time will be corrected to 1 minute when the door is closed.

END OF PROGRAM

At the end of the program the buzzer sounds (if enabled), after which the temperature and program name will alternate with "Program end" on the top line of the DISPLAY (G); the bottom line continues to show "Duration XX min".

26