User instructions
Before starting a washing program make sure that:
ξThe water supply tap is open.
ξThe correct amount of detergent has been added to the dispenser.
ξThe baskets have been correctly loaded.
ξThe spray arms are able to rotate freely and without obstruction.
ξThe dishwasher door is securely closed.
When the appliance is used for the first time, set the hardness of the water and also set the buzzer as required (enabled/disabled). For the relative instructions, see "CUSTOMISING YOUR APPLIANCE".
SWITCHING ON
With the door open press the ON/OFF key
(A). The dishwasher comes on and the message shown below appears on the DISPLAY (G).
PROGRAMMING
On this model of dishwasher, all programming operations are only possible with the door open.
PROGRAM SELECTION
After the initial message, the system offers you the assisted programming function (Wizard), in which you only have to select the level of dirt and the washing strategy.
Shown on the display:
ξPress (D) or (E) to select assisted programming (see "Assisted programming").
ξPress (B) to exit assisted programming and choose standard programming (see "Standard programming").
21
