Sharp UX-P710 Other remote commands, Recording a memo p, OGM Only mode p Turning on OGM Only mode

Remote Operations

Other remote commands

After listening to your messages, you can enter any of the following commands.

Note: The following commands cannot be entered while messages are being played. If you do not want to wait until playback ends to enter a command, first

stop playback by pressing , , and then enter the command.

Changing the reception mode

♦A.M. mode: , ,

♦FAX mode: , ,

♦TEL mode: , ,

Caution: If you select TEL mode, you will not be able to enter any other remote commands.

♦TEL/FAX mode: , ,

Recording a new outgoing message

1Press , .

2When you hear a short beep, speak into the telephone to record the new message.

•The message can be up to 60 seconds long. After 60 seconds, you will hear a beep, and the new message will play back. To stop recording before 60 seconds

elapses, press , .

Recording a “memo” (p. 33)

1Press , .

2When you hear a short beep, speak into the telephone to record the memo.

3When you are finished, press ,

.

OGM Only mode (p. 34)

Turning on OGM Only mode:

Press , , .

Turning off OGM Only mode:

Press , , .

38