Sharp UX-P710 Resolution and Contrast, Removing a document from the feeder, Resolution settings

Resolution and Contrast

2Place the document face down with the top edge going in first, and insert it all the way into the feeder. Make sure that the roller draws the document in.

�

•Display: [READY TO SEND].

3Adjust the resolution and/or contrast settings (p. 18), and then dial the receiving machine (p. 19).

Removing a document from the feeder

1 Press F then . The document will feed out.

2If the document is jammed and does not feed out, open the cover and remove the document (see Clearing a jammed document on page 57).

•Caution: Attempting to remove a jammed document without opening the cover may damage the feeder mechanism.

Resolution and Contrast

You can adjust the resolution and contrast before sending a document.

♦The default resolution setting is STANDARD. The default contrast setting is AUTO.

♦Adjust the settings each time you don't want to use the default settings.

Note: The resolution and contrast settings are only effective for sending; not for receiving.

Resolution settings

STANDARD	Use STANDARD for
	ordinary documents.
	This provides the fastest
	transmission.
FINE	Use FINE for documents
	containing small letters
	or fine drawings.

SUPER FINE Use SUPER FINE for documents containing very small letters or very fine drawings.

HALF TONE Use HALF TONE for photographs and illustrations. The original will be reproduced in 64 shades of gray.

18