Cleaning the Print Head and Rollers

b. Place the left ends so that the

8 Close the operation panel.

shafts of the gears fit into the

 

holders.

 

Cleaning the housing

8. Maintenance

6Turn the front gear in the direction shown until the film is taut.

7Close the print compartment cover.

Press down on the marks on both sides of the cover to make sure it clicks into place.

Wipe the external parts and surface of the machine with a dry cloth.

Caution: Do not use benzene or thinner. These solvents may damage or discolor the machine.

About the lithium battery:

The machine uses a lithium battery to retain settings and information programmed in the machine when the power is turned off. Battery power is consumed primarily when the power is off. With the power kept continuously off, the life of the battery is about 5 years. If the battery dies, have your dealer or retailer replace it. Do not try to replace it yourself.

49

Page 51
Image 51
Sharp UX-A760, UX-P710 operation manual Cleaning the housing, About the lithium battery