Sharp UX-A760, UX-P710 Skip forward Press, Play new messages only First stop, Comments

2Enter your remote code number and

then press .

•You will hear a series of beeps equal to the number of messages recorded, or one long beep if four or more messages have been received. The machine will then play back the messages. When all messages have been played back, you will hear a long beep.

•If no messages have been received, you will hear a short beep. You can either hang up, or perform any of the remote operations described in the following section.

3While the messages are playing, you can do any of the following:

•Repeat: Press , .

•Skip forward: Press , .

•Stop playback: Press , . After stopping playback, you can enter any of the remote commands described in the following section.

•Play new messages only: First stop

playback by pressing , ,

and then press , .

•Erase: To erase the message you

are currently listening to, press ,

.

4When you have finished listening to your messages, you can do any of the following:

Remote Operations

• Erase all messages: Press		,
,	.
• Repeat playback: Press		,
.
• Perform other operations: You can
enter any of the remote commands
described in the following section.
• Hang up: Before hanging up, press
twice if you want the machine
to resume normal operation
immediately (in some cases, the			Answering System
hang up unless you press
machine may not accept new calls
for one or two minutes after you
twice).			4.

Comments:

♦If you enter an incorrect command, or pause too long while entering a command, you will hear 4 beeps. Re- enter the correct command.

♦If you wait more than 10 seconds before entering a command, or enter your remote code number incorrectly twice in a row, you will be disconnected.

37