Sharp UX-P710, UX-A760 operation manual Messages and Signals

Messages and Signals

Messages and Signals

Display messages

♦If a message is longer than the display, the parts of the message will alternate.

♦If you have turned on the Caller ID function, see page 40 for display messages related to Caller ID.

ADD PAPER & /	This appears when a fax has been received to memory
PRESS START KEY	(page 30) because there is no paper in the tray. Add
(alternating messages)	paper and press		START to print the fax.
A.M. IN USE	The answering system has answered a call and the
(UX-A760 only)	outgoing message is playing.
COM ERROR XX	Transmission or reception was not successful. If this
(XX is a number used by	message alternates with another message indicating a
service technicians to	problem, fix the problem and try the fax operation again.
diagnose problems)	If no other message appears, press			to clear
	the message and then try the fax operation again. If the
	error persists, see Line Error on page 50.
COVER OPEN	Open the operation panel and make sure that the print
	compartment cover is completely closed (press down on
	the	marks on each side of the cover).
DOCUMENT JAMMED	The original document is jammed. See the following
	section, Clearing Paper Jams. Document jams will occur
	if you load more than 10 pages at once or load
	documents that are too thick (see page 17).
FAX RX IN MEMORY	This appears when the Key Lock function is activated
	and a fax has been received to memory because there
	is no paper in the paper tray. Release the Key Lock (see
	page 45), add paper, and then press			START to print
	the fax.

54