Sharp UX-A760, UX-P710 operation manual KEY Lock

Messages and Signals

FILM END	Open the operation panel and the print compartment
	cover and check the imaging film (see Replacing the
	imaging film on page 9). If the film has completely
	wound onto the front spool, replace the film. Otherwise,
	make sure the film is loaded correctly and remove any
	slack.
KEY LOCK	The Key Lock function has been activated. See page
	44.
MEMORY IS FULL	The memory is full. This may occur during fax reception
	if too much data is received before the pages can be
	printed out. If faxes have been received to memory
	because printing is not possible (an additional message
	will indicate the problem), resolve the problem so that
	printing can continue (see page 30).
MESSAGE #	The indicated number of messages are recorded in the
(UX-A760 only)	answering system.
NO # STORED	This appears if you attempt to search for an auto-dial
	number when none have been stored.
ON HOOK DIAL	The	key has been pressed and the fax machine is
	waiting for you to dial.
OVER HEAT	The print head has overheated. Operation can be
	continued after it cools.
PAPER JAMMED	A paper jam has occurred. Remove the jam as
	explained on page 59.
PRINT HEAD FAIL	The print head has failed and requires service.
PRINTER ERROR	A printer error has occurred. Try the operation again.
PRINTING	The machine is preparing to or printing out a document
	from memory.
READY TO SEND	A document has been loaded and the fax machine is
	waiting for you to begin faxing or copying.

9. Trouble- shooting

55