7Insert the new roll of film into the print compartment:

a. Fit the right ends of the spools onto the pins.

b. Place the left ends so that the shafts of the gears fit into the holders.

Imaging Film

8Turn the front gear in the direction shown until the film is taut.

If there is a label on the film, continue to turn the gear until the label is no longer visible.

9Close the print compartment cover.

Press down on the marks on both sides of the cover to make sure it clicks into place.

10 Close the operation panel.

1. Installation

11

Page 13
Image 13
Sharp UX-A760, UX-P710 operation manual Imaging Film