Sharp UX-P710, UX-A760 Flash Select Setting For PBX, Language Select Setting, Key Tone setting

Flash Select Setting For PBX

Key Tone setting

The machine normally sounds a beep each time you press a key on the operation panel. This confirms that the key has been correctly pressed.

If desired, you can turn off the beep sound. Follow the steps below.

1Press F , , and .

2Press (YES) to turn on the beep sound.

Press (NO). to turn off the beep sound.

3 Press to exit.

Flash Select Setting For PBX

Note: This setting is normally only used in Germany. In other countries, you can try changing the setting if you encounter difficulty with the default setting.

If the machine is connected to a PBX and the PBX uses the “Flash” method to connect to an outside line, you must select the appropriate Flash Select setting depending on whether your PBX line is a normal telephone line or a high- speed line.

1Press F , , and .

2Press (SHORT TIME) if your PBX line is a normal telephone line.

Press (LONG TIME) if your PBX line is a high-speed line.

3 Press to exit.

Language Select Setting

This setting is used to change the language used in the display, reports and lists.

1Press F , , and .

2Press to select English.

Press to select Polish.

Press to select Turkish.

Press to select Romanian.

3 Press to exit.

16