HHB comm CDR 830 manuel dutilisation Monitoring a source, To establish the copy-bit Scms setting

More recording

		2,3
SCROLL	DISPLAY	MONITOR
ERASE	FINALIZE

CD TEXT

Monitoring a source

When recording, or in record- pause mode, the source signal is always available for monitoring through a connected audio system or through a pair of headphones plugged into the CDR–830’s phones jack. Even if you’re not recording, you can still monitor—useful for cueing up for the next recording and also for checking that tracks are starting in the proper places during automatic track numbering.

1 Start the source component playing.

Make sure that the input selector is set to the correct input.

2 Press MONITOR.

The indicator above the MONITOR button lights up.

•When automatic track numbering has been selected, the TRACK indicator will light for 2 seconds at track start points. See Automatically numbering tracks on page 33 if you find the recorder can’t recognize the gaps between tracks.

•When monitoring through a digital output, you cannot hear changes you make in the recording level or balance.

3 To switch off monitoring, press MONITOR again.

The monitor indicator switches off.

2,3,4

DIGITAL	ANALOG
REC LEVEL	REC LEVEL

TEXT

SYNCHRO

PROFESSIONAL

1

AUTO/

¥￿ REC SYNCHRO MANUAL

	DISPLAY		A B C	D E F
		1	2	3
	TITLE	G H I	J K L	M N O
	/MODE
		4	5	6
	SCROLL P Q R S		T U V	W X Y Z
1		7	8	9
	MENU/	MARK		TEXT
	DELETE
		10/0	>10		2,3
	4	CURSOR		¢￿

3

1 ENTER Á￿

7 2,4

REPEAT RANDOM NAMECLIP

8

FADER PROGRAM CHECK CLEAR

SKIP PLAY SKIP ID INPUT

SELECTER

SET CLEAR

COMPACT DISC RECORDER

REMOTE CONTROL UNIT

To establish the copy-bit (SCMS) setting

These settings control the number of generations of digital copies that can be made from the recorded disc. Use this function to set whether the disc can be copied unlimited times, once, or not at all. The status of the copy- bit in the incoming digital signal is ignored and the copy-bit setting on the recorded disc is only set by this menu function.

1Press MENU/DELETE.

2Turn the jog dial until COPY : PERMIT appears in the display, then press to

ENTER.

3Use the jog dial (4 and ¢ on the remote) to

select the copy flag setting.

The default setting is copy permit. Turn the dial to cycle through the following settings:

COPY : PERMIT

ÐPermits unlimited copies

COPY : ONCE

ÐPermits one copy only

COPY : INHIBT

ÐRestricts all copying

•When the original setting is changed, a question mark (?) blinks next to the selected option.

4 Press the jog dial (ENTER) to confirm the setting.

The question mark disappears from the display and the new setting is confirmed.

36