HHB comm CDR 830 Recording all tracks from a source, Press 7 to finish recording

Getting Started

1

DIGITAL	ANALOG
REC LEVEL	REC LEVEL

TEXT

SYNCHRO

PROFESSIONAL

6 3

SCROLL DISPLAY MONITOR

ERASE FINALIZE

CD TEXT

2

AUTO/

¥￿ REC SYNCHRO MANUAL

DISPLAY		A B C	D E F	3
	1	2	3
TITLE	G H I	J K L	M N O
/MODE
	4	5	6
SCROLL P Q R S		T U V	W X Y Z
	7	8	9
MENU/	MARK		TEXT
DELETE
	10/0	>10
4	CURSOR		¢￿
		3
1	ENTER		Á￿

7

REPEAT RANDOM NAMECLIP

6 8

FADER PROGRAM CHECK CLEAR

SKIP PLAY SKIP ID INPUT

SELECTER

SET CLEAR 2

COMPACT DISC RECORDER

REMOTE CONTROL UNIT

20

Recording all tracks from a source

If you want to copy all the tracks from a source, use this mode. Like the 1-track synchro recording mode, the recorder starts and stops automatically. When recording from MD or CD, you can play the source in either normal play mode, or program play if you’d like the recorded tracks in a different order to the original. We do not recommend recording from a DAT in program play mode—use the 1-track synchro recording mode if you want to record the tracks in a different order.

If you are recording from a noisy analog source, such as an old recording, or from a source with long quiet sections, the recorder may not recognize the end of tracks. In this case, you can still use this mode, but it may be better to use manual track numbering (see page 33).

1 Load a CD-R or CD-RW disc.

Check the display to make sure that there's enough space on the disc for what you want to record.

2 Press INPUT SELECTOR to choose an input.

Pressing INPUT SELECTOR repeatedly switches the active input:

Analog - Optical - Coaxial

The recorder's display indicates the current input.

3Make sure that the source is not playing, then press

SYNCHRO twice.

Press SYNCHRO repeatedly to change the recording mode and select SYNC-ALL.

1-track sync CD-R

	SYNCÐ1	SYNC-1
All-track sync		CD-R
	SYNCÐALL
		SYNC
All-track sync		CD-R
	SYNCÐFINAL
w/ finalization		FINALIZE
		SYNC
Record-pause		CD-R
	O1 O1 OO:OO
(no sync)

Synchro recording won't work if the source is already playing!

The recorder goes into all-sync record pause and the SYNC indicator starts to blink.

CD-R

SYNCÐALL SYNC

The display shows the all-track sync mode, with the SYNC indicator blinking to show that recording can start.

4 Play the source.

The recorder starts recording automatically.

5After recording all tracks from the source, the recorder goes into record-

pause.

After the recorder encounters about five seconds of continuous silence, it assumes the end of the source has been reached and goes into record-pause and the display shows the SYNC ALL message again.

Be careful: If the recorder detects another signal or start ID (DAT or DCC) it will start recording again!

•The recorder will enter record- pause if the digital signal is interrupted for more than 5 seconds—see Digital signal interruptions on page 18.

6 Press 7 to finish recording.

After pressing 7, the display shows PMA REC while it records the track information to the disc.

Note: If you find that synchro recording does not seem to work, see the troubleshooting section on pages 40-42 for possible remedies.