Sending a Fax: Auto Dialling

Using an auto-dial number to send a fax

1Load the document(s).

If desired, press

to set the

resolution and/or contrast.

2Dial the fax number using one of the methods below:

Rapid Key Dialling: If the number is assigned to a Rapid Key, press the Rapid Key.

Using the phonebook: Press

F , and then F or F until

the name or number of the other party appears in the display (names will appear in alphabetical order). To go directly to names that begin with a particular letter, press the appropriate number key one or more times to enter that letter (see page 7).

When the desired destination

appears, press START .

Direct keypad dialling: Press the number keys to enter a full fax number (to insert a pause between

digits, press F ). When finished,

press START .

3Dialling and transmission will take place automatically.

Sending a Fax: Auto Dialling

To cancel transmission, press

.

Sending

Faxes

If the transmission is completed

 

 

successfully, the machine will beep

 

 

once.

2.

 

If an error occurs, the machine will

 

 

 

beep three times.

 

 

Redial

The machine retains the most recent 20 numbers that have been dialled. You can automatically redial any of these numbers.

1Load the document(s).

If desired, press

to set the

resolution and/or contrast.

 

2 Press F .

Display: [<REDIAL>]

3

If needed, press

F

or

F

 

 

until the desired number appears in the display.

4 Press START . Dialling begins.

Make sure the desired number

appears before pressing START , or

redialling will not take place (sometimes it takes several seconds for the number to appear).

23

Page 25
Image 25
Sharp UX-A760, UX-P710 operation manual Sending a Fax Auto Dialling, Using an auto-dial number to send a fax, Redial