Sharp UX-A760, UX-P710 operation manual Reception and copying problems

Problems and Solutions

Dialling is not possible.	•	Make sure the power cord is properly plugged into a
		power outlet.
	•	Make sure that the telephone line is properly
		connected to both the TEL. LINE socket and the wall
		socket (see page 9).
The power is on, but no	•	Make sure that the receiving machine has paper.
transmission takes place.	•	If the receiving machine is in manual mode with no
		attendant, reception will not be possible.
	•	Check the display for error messages.
	•	Pick up the handset and check for a dial tone. Dial the
		receiving machine manually and make sure that it is
		responding (you should hear a fax tone).
Nothing is printed at the	•	Make sure that the document for transmission is
receiving end.		placed face down in the feeder.
A distorted image is	•	Noise on the telephone line may cause distortion. Try
received at the other end.		sending the document again.
	•	Make a copy of the document on your machine. If the
		copy is also distorted, your machine may need
		service.

9. Trouble- shooting

Reception and copying problems

Problem		Solution
The printing paper does	•	Fan the paper before inserting it in the paper tray, and
not feed correctly, or multi-		tap the edges against a flat surface to even the stack.
feeds occur.		(When adding paper, if paper still remains in the tray,
		take it out and combine it with the new paper.)
	•	Make sure the paper is inserted straight in the tray.
	•	Do not insert more than 10 sheets of paper in the tray.

51