Connecting the phone line

TEL. LINE

Standard wall

socket

socket

 

Imaging Film

Imaging Film

Checking the pre-loaded sample roll

A sample roll of imaging film has been pre-loaded in the machine. Perform steps 1 to 2 and 8 to 10 of Replacing the imaging film below to check the film and make sure it is taut.

The sample roll of imaging film can print about 20 pages.

If [FILM END] appears

If [FILM END] appears in the display for longer than 10 seconds, open the machine (see Steps 1 and 2 of Replacing the imaging film below) and check the film. If the film has completely wound onto the front spool, replace the film. Otherwise, perform Steps 8 to 10 of Replacing the imaging film to remove slack.

Replacing the imaging film

Replacement film

When replacing the imaging film, use the following imaging film:

SHARP UX-71CR (one roll)

or

SHARP UX-72CR (two rolls)

Follow the steps below to replace the imaging film.

Note: Before replacing the imaging film, remove any paper from the paper tray and push in the tray extension.

1. Installation

9

Page 11
Image 11
Sharp UX-A760 Imaging Film, Connecting the phone line, Checking the pre-loaded sample roll, Replacing the imaging film