Sharp UX-P710, UX-A760 Using TEL Mode, Answering a call on a phone connected to the same line

Using TEL Mode

Answering a call on a phone connected to the same line

Note: To ensure correct operation of this feature, the Fax Remote Reception setting must be set to YES (see page 28).

1Answer the phone when it rings.

2If you hear a soft fax tone, wait until the machine responds (the phone will go dead), then hang up.

3If the machine doesn't respond, or if the other party first talks to you and then wants to send a fax, press

once and twice on the phone (only on a tone dial phone). This signals the machine to begin reception. Hang up.

(You can also start fax reception by setting down the phone without hanging up, walking over to the

machine, and pressing START .)

•Step 3 is necessary if you have set the Fax Signal Receive setting to NO (page 29).

Putting a call on hold

To put the other party on hold during a

phone call, press ( on the

UX-A760). When this is done, they cannot hear you. You can put the handset back in the cradle without breaking the connection. When you are ready to speak with the other party again, pick up the handset. If you did not put the handset back in the cradle,

press again to resume conversation.

Fax Remote Reception setting

If you want ensure that the machine is always able to start fax reception when

you press , , on an extension phone, set this function to YES (this keeps the machine from entering sleep mode).

Initial setting: NO

1Press F , , , and .

2Press (YES) to turn on fax remote reception (disable sleep mode).

Press (NO) to turn off fax remote reception.

3 Press to exit.

28