Fax Receive setting

If you prefer that faxes not be received to memory, follow the steps below to change the Fax Receive setting to “PAPER”.

When the Fax Receive setting is “PAPER”, fax reception will not take place (a communication error will occur) if a problem occurs that prevents printing. However, there is no concern that fax reception will be prevented by the memory being full.

When “PAPER” is selected, make sure there is paper in the paper tray.

Initial setting: MEMORY

1Press F , , , and .

2Press (MEMORY) to receive faxes to memory before printing them out.

Press to have received faxes printed without receiving them to memory.

3 Press

to exit.

Reception to Memory

Erasing received faxes from memory

When received faxes are held in memory due to a printing problem, you can erase the faxes from memory without printing them out.

Caution: When this procedure is

 

performed, the faxes will be lost.

Receiving Faxes

1

UX-P710: Press

 

.

 

 

 

UX-A760: Press

C

.

3.

 

 

2

Press

,

.

 

 

Checking how much memory is currently in use

To check the percentage of memory

currently in use, press F , . The percentage will appear briefly in the display.

31

Page 33
Image 33
Sharp Reception to Memory, Fax Receive setting, Erasing received faxes from memory, UX-P710 Press UX-A760 Press