3.0 CONFIGURATION
The Model 2010 is configured using four internal switches. Figure 1 shows the switch locations with respect to other PC board components.
Figure 1. Switch locations on the 2010 PC board
3.1 SETTING INTERNAL SWITCHES
The four switches shown in Figure 2 allow selection of character length and extended signaling rate. These switches are located internally on the Model 2010's PC board. To access them use a small flathead screwdriver to pop open the Model 2010's case as shown in Figure 3.
Figure 2. Close-up of the Model 2010’s configuration switches
2010AS3297 Manual | 3 |
B&B Electronics
PH (815)
