B&B Electronics 2010 2.0 GENERAL INFORMATION

B&BElectronics -- PO Box 1040 -- Ottawa, IL 61350

PH(815) 433-5100 -- FAX (815) 434-7094

2.0 GENERAL INFORMATION

Thankyou for your purchase of this B&B Electronics product. This

producthas been thoroughly inspected and tested and is warranted for one

yearparts and labor. If any questions or problems arise during installation

oruse of this product, please do not hesitate to contact B&B Electronics

Technical Supportat (815) 433-5100.

• Conformsto CCITT V.14 and V.22 standards

• Adaptsasynchronous terminals to synchronous modems and

multiplexers

• Allowscharacter l engthsfrom 8 - 11 bits

• Requiresno AC power or batteries

• Datarates to 19.2 Kbps

• Automaticallyadjusts synchronous data rates

• Miniaturesize

• Acceptsexternal clocking

• Madein the U SA

TheModel 2010converter gives asynchronous hardware access to the

highspeed capabilitiesof synchronous modems or multiplexers. The Model

2010plugs directly into the asynchronous RS-232 DTE port and connects

viaR S-232 cable tothe synchronous DCE device.

Drawingpower from the R S-232 interface,the Model 2010 needs no

AC power or batteriesto operate and supports data rates to 19.2 Kbps.

Becausethe Model 2010 automatically adjusts the synchronous data rate

tomatch the asynchronous DTE's output rate, no data rate strapping is

necessary.The Model 2010 derives clocking externally from the clock of

thesynchronous DCE, and imposes no limit on data block size. Characters

maybe up to 11 bits long.

Measuringonly 3.2" x 2.0" x .75", the Model 2010 is housed in a sturdy

ABSplastic case. It comes fully equipped with a DB-25 male connector and

aD B-25 female connector.