Activating Caller ID

6. Caller ID (Requires Service)

Activating Caller ID

Important: To use this function, you must subscribe to a Caller ID service from your phone company. The machine may not be compatible with some Caller ID services.

Display messages

One of the following messages will appear while the machine rings if caller information is not available.

NO

No caller information was

SERVICE

received. Make sure that

 

your service has been

 

activated.

If you subscribe to a Caller ID service, you can have the machine show the name and number of the caller when you receive a call. Follow the steps below to activate this function.

1

Press F ,

, and

.

2

Press

(YES) to turn on Caller

 

ID.

 

 

CALLER-ID ERROR

OUT OF

AREA

Noise on the telephone line prevented reception of caller information.

The call was made from an area which does not have Caller ID service, or the service is not compatible with your service.

(To turn off Caller ID, press

(NO).)

3 Press

to exit.

Note: Some caller ID services may not provide the name of the caller. In this case, only the phone number will appear when you receive a call.

PRIVATE

Caller information was not

CALL

provided at the caller’s

 

request.

Caller ID List

The machine keeps a log of the most recent 20 calls and faxes you have received (the Caller ID list). You can view the list and automatically dial a number from the list.

The list is only available if you have Caller ID service and have turned on the Caller ID function.

After you have received 20 calls, each new call will delete the oldest call.

40

Page 42
Image 42
Sharp UX-P710, UX-A760 operation manual Activating Caller ID, Caller ID List, Display messages