Philips SCD510/00 Preparing for use, Cord operation, Battery operation non-rechargeable batteries

ENGLISH 11

Preparing for use

Baby unit

You can use the baby unit corded or on non-rechargeable batteries. Even if you are going to use the unit corded, we advise you to insert the non- rechargeable batteries.This guarantees automatic back-up in case of power failure.

Cord operation

1Put the large appliance plug in the baby unit and put the adapter in a wall socket.

,The power-on light goes on.

Battery operation (non-rechargeable batteries)

The baby unit runs on four 1.5V R6 AA batteries (not included). We recommend you to use Philips LR6 PowerLife batteries or an equivalent type.

Do not use rechargeable batteries, as the baby unit does not have a charging function.

Unplug the baby unit and make sure your hands and the unit are dry when you insert the non-rechargeable batteries.

1Remove the lid of the compartment for non-rechargeable batteries.

2Insert four non-rechargeable batteries.

Note: Make sure the + and - poles point in the right direction.

3Reattach the lid.

Note:When the batteries are low, the battery light on the baby unit flashes red.

Parent unit

Battery operation (rechargeable battery pack)

The parent unit comes with a SCD510 NiMH rechargeable battery pack. Charge the parent unit before you use it for the first time or when the battery light indicates that the battery pack is low.The battery light flashes red when the battery pack is low.The battery light starts to flash red 30 minutes before the battery pack is completely empty.

Note: If the battery pack is completely empty, the parent unit automatically switches off and loses contact with the baby unit.