14ENGLISH

, The LINK light on the parent unit turns green and lights up continuously when a connection has been established between the baby unit and parent unit.

, If no connection is established, the LINK light on the parent

unit stops flashing and lights up red.The parent unit beeps from time to time.

Positioning the baby monitor

1 Place the baby unit at least 3 feet/1 meter away from your baby.

2 Place the parent unit within the operating range of the baby unit. Make sure it is at least 3 feet/1 meter away from the baby unit to avoid acoustic feedback.

For more information on the operating range, see section ‘Operating range’ below.

Operating range

The operating range of the baby monitor is 330 meters/1000 feet in open air. Depending on the surroundings and other disturbing factors, this range may be smaller. Indoors the operating range is up to 50 meters/150 feet.

Dry materials

Material thickness

Loss of range

Wood, plaster, cardboard, glass

< 30cm/12in

0-10%

(without metal, wires or lead)

 

 

Brick, plywood

< 30cm/12in

5-35%

Reinforced concrete

< 30cm/12in

30-100%

Metal grilles or bars

< 1cm /0.4in

90-100%

Page 14
Image 14
Philips SCD510/00 manual Positioning the baby monitor, Operating range, Dry materials Material thickness Loss of range