Philips SCD510/00 manual Environment, Warranty, Frequently asked questions, Question Answer

ENGLISH 19

Environment

- Dispose of batteries properly. Do not incinerate. Batteries may explode if overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before discarding.

- It is suggested that you contact your local town or city to determine proper battery redemption site(s) in your area.

Warranty

FULL TWO-YEAR WARRANTY

Philips Electronics North America Corporation (USA) and Philips Electronics Ltd (CANADA) warrant each new Philips AVENT product, model SCD510/00, against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT:This warranty does not cover damage resulting from accident, misuse or abuse, lack

of reasonable care, or the affixing of any attachment not provided with the product. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply call toll-free 1-800-54-AVENT.

	Frequently asked questions
	This chapter lists the questions most frequently asked about the appliance.
	If you cannot find the answer to your question, call 1-800-54-AVENT (1-
	800-542-8368) for assistance.
Question	Answer
Why don’t both the power-	Perhaps the rechargeable battery pack of the parent unit is empty and
on light of the baby unit and	the parent unit is not connected to an electrical outlet. Insert the small
the LINK light of the parent	appliance plug into the parent unit and put the adapter in a wall socket.
unit come on when I press	Then press the on/off button to establish connection with the baby unit.
the on/off buttons of the
units?
	Perhaps the non-rechargeable batteries of the baby unit are empty and
	the baby unit is not connected to an electrical outlet. Replace the non-
	rechargeable batteries or connect the baby unit to an electrical outlet.
	Then press the on/off button to establish connection with the parent
	unit.
	The baby unit and the parent unit may be out of range of each other.
	Move the parent unit closer to the baby unit, but not closer than 3
	feet/1 meter.
	If the LINK light on the parent unit still does not start to flash, use the
	reset function to reset the units to their default settings.