HP ProCurve 2500 Access, and, IP Addressing, Figure 5-7.Example of Executing a Series of Console Commands

Configuring IP Addressing, Interface Access, and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

IP Addressing,	Access, and
Configuring	Interface

The switch implements the Event Log change immediately. The switch implements the other console changes after executing write memory and reload.

Figure 5-6. Example of Executing the Console Command with Multiple Parameters

You can also execute a series of console commands and then save the configuration and boot the switch. For example:

Configure the individual parameters.

Save the changes.

Boot the switch.

Figure 5-7. Example of Executing a Series of Console Commands

5-20