IP Addressing,

Access, and

Configuring

Interface

 

 

Configuring IP Addressing, Interface Access, and System Information

IP Configuration

To Configure IP Addressing.

1.From the Main Menu, Select.

2.Switch Configuration ...

5.IP Configuration

N o t e

If multiple VLANs are configured, a screen showing all VLANs appears instead

 

of the following screen.

 

 

The default setting for TimeP Config is DHCP. Setting it to Manual, then pressing [ v] or [Tab] causes the Server Address parameter to appear.

For descriptions of these parameters, see the online Help for this screen.

Before using the DHCP/ Bootp option, refer to “DHCP/Bootp Operation” on page 5-11.

Figure 5-1. Example of the IP Service Configuration Screen without Multiple

VLANs Configured

2.Press [E] (for Edit).

3.If the switch needs to access a router, for example, to reach off-subnet destinations, select the Default Gateway field and enter the IP address of the gateway router.

4.If you need to change the packet Time-To-Live (TTL) setting, select Default TTL and type in a value between 2 and 255 (seconds).

5.At the TimeP Config field do one of the following:

If you want the switch to obtain the IP address of the Timep server via DHCP server, keep the value as DHCP.

If you want to manually specify the IP address of the Timep server, use the Space bar to select Manual.

If you don’t have a Timep server set up, use the Space bar to change the value to Disabled.

5-6

Page 90
Image 90
HP 2500 To Configure IP Addressing, From the Main Menu, Select, Switch Configuration IP Configuration, Following screen