HP 2500 manual CLI Viewing Port Status and Configuring Port Parameters

Optimizing Port Usage Through Traffic Control and Port Trunking

Viewing Port Status and Configuring Port Parameters

Optimizing Port Usage Through Traffic Control and

Figure 6-12. Example of Port/Trunk Settings with a Trunk Group Configured

2.Press [E] (for Edit). The cursor moves to the Enabled field for the first port.

3.Refer to the online help provided with this screen for further information on configuration options for these features.

4.When you have finished making changes to the above parameters, press [Enter], then press [S] (for Save).

CLI: Viewing Port Status and Configuring Port Parameters

Port Status and Configuration Commands

show interfaces	below
show interface config	page 6-7
interface	page 6-8

From the CLI, you can configure and view all port parameter settings and view all port status indicators.

Using the CLI To View Port Status. Use the following commands to dis- play port status and configuration:

■show interfaces: Lists the full status and configuration for all ports on the switch.

■show interface config: Lists a subset of the data shown by the show interfaces command (above); that is, only the enabled/disabled, mode, and flow control status for all ports on the switch.

6-6