HP 2500 manual Stacking Status All

Configuring Advanced Features

Configuring Advanced Features

HP ProCurve Stack Management

For status descriptions, see the table on page 9-49.

New Member added in step 6.

Figure 9-11. Example of Stack Management Screen After New Member Added

Using the Commander’s Menu To Move a Member From One Stack to

Another. Where two or more stacks exist in the same subnet (broadcast domain), you can easily move a Member of one stack to another stack if the destination stack is not full. (If you are using VLANs in your stack environ- ment, see "Stacking Operation with a Tagged VLAN" on page 9-47.) This procedure is nearly identical to manually adding a Candidate to a stack (page 9-20). (If the stack from which you want to move the Member has a Manager password, you will need to know the password to make the move.)

1.To move a Member from one stack to another, go to the Main Menu of the Commander in the destination stack and display the Stacking Menu by selecting

9.Stacking...

2.To learn or verify the MAC address of the Member you want to move, display a listing of all Commanders, Members, and Candidates in the subnet by selecting:

2.Stacking Status (All)

9-22