HP 2500 CLI Viewing and Configuring Community Names, Listing Current Community Names and Values

and Managing	Switch
Monitoring	the

Configuring for Network Management Applications

SNMP Communities

CLI: Viewing and Configuring Community Names

Community Name Commands Used in This Section

show snmp-server [<community-string>]	below
snmp-server	page 8-9
[contact <contact-str>]	page 8-9
[location <location-str>]	page 8-9
[community <community-str>]	page 8-9
[host <community-str><ip-addr>]	page 8-12
[<none debug all not-info critical>]
[enable traps <authentication>	page 8-12

Listing Current Community Names and Values

Listing Community Names. This command lists the data forcurrently con- figured SNMP community names (along with trap receivers and the setting for authentication traps — see “Trap Receivers and Authentication Traps” on page 8-10).

Syntax: show snmp-server [<community-string>]

This example lists the data for all communities in a switch; that is, both the default "public" community name and another community named "red-team"

Default

Community and

Settings

Non-Default

Community and

Settings

Trap Receiver Data (See page 8-10.)

Figure 8-3. Example of the SNMP Community Listing with Two Communities

To list the data for only one community, such as the "public" community, use the above command with the community name included. For example:

8-8