HP 2500 Web Viewing Port Status and Configuring Port Parameters, Click on Port Configuration

Optimizing Port Usage Through Traffic Control and Port Trunking

Viewing Port Status and Configuring Port Parameters

Web: Viewing Port Status and Configuring Port Parameters

In the web browser interface:

1.Click on the Configuration tab.

2.Click on [Port Configuration].

3.Select the ports you want to modify and click on [Modify Selected Ports].

4.After you make the desired changes, click on [Apply Settings].

Note that the web browser interface displays an existing port trunk group. However, to configure a port trunk group, you must use the CLI or the menu interface. For more on this topic, see “Port Trunking” on page 6-10.

Optimizing Port Usage Through Traffic Control and

6-9