HP 2500 manual CLI Configuring Port Monitoring, Port Monitoring Commands Used in This Section

and Analyzing	Operation
Monitoring	Switch

Monitoring and Analyzing Switch Operation

Port Monitoring Features

iv.Press [Enter], then press [S] (for Save) to save your changes and exit from the screen.

Note: This screen appears instead of the one in figure 10-17 if the Monitor parameter is set

to VLAN

Example of a VLAN Monitoring Parameter

Figure 10-18.Example of Selecting a VLAN to Monitor

7.Return to the Main Menu.

CLI: Configuring Port Monitoring

Port Monitoring Commands Used in This Section

show mirror-port	below
mirror-port	page 10-25
monitor (VLAN)	page 10-25
monitor (Port)	page 10-25

You must use the following configuration sequence to configure port monitor- ing in the CLI:

1.Assign a monitoring (mirror) port.

2.Designate the port(s) and/or a VLAN to monitor.

Displaying the Port Monitoring Configuration. This command lists the port assigned to receive monitored traffic and the ports being monitored.

Syntax: show mirror-port

For example, if you assign port 12 as the monitoring port and configure the switch to monitor ports 1 - 3, show mirror-port displays the following:

10-24