HP 2500 manual Example of Candidate List in Stack Management Screen

Configuring Advanced Features

HP ProCurve Stack Management

The Commander automatically selects an available switch number (SN). You have the option of assigning any other available number.

Candidate List

Figure 9-10. Example of Candidate List in Stack Management Screen

3.Either accept the displayed switch number or enter another available number. (The range is 0 - 15, with 0 reserved for the Commander.)

4.Use the downarrow key to move the cursor to the MAC Address field, then type the MAC address of the desired Candidate from the Candidate list in the lower part of the screen.

5.Do one of the following:

•If the desired Candidate has a Manager password, press the downarrow key to move the cursor to the Candidate Password field, then type the password.

•If the desired Candidate does not have a password, go to step 6.

6.Press [Enter] to return to the Actions line, then press [S] (for Save) to complete the Add process for the selected Candidate. You will then see a screen similar to the one in figure 9-11, below, with the newly added Member listed.

Note: If the message Unable to add stack member: Invalid Password appears in the console menu’s Help line, then you either omitted the Candidate’s Manager password or incorrectly entered the Manager password.

Features Configuring Advanced

9-21