HP ProCurve 2500 Configuration Changes and Monitoring Traffic, Using the Commander To Access Member Switches for, Features, Configuring Advanced

Configuring Advanced Features

Configuring Advanced Features

HP ProCurve Stack Management

Using the Commander To Access Member Switches forConfiguration Changes and Monitoring Traffic

After a Candidate becomes a stack Member, you can use that stack’s Commander to access the Member’s console interface for the same configuration and monitoring that you would do through a Telnet or direct-connect access.

1.From the Main Menu, select:

9.Stacking...

5.Stack Access

You will then see the Stack Access screen:

For status descriptions, see the table on page page 9-49.

Figure 9-16. Example of the Stack Access Screen

Use the downarrow key to select the stack Member you want to access, then press [X] (for eXecute) to display the console interface for the selected Member. For example, if you selected switch number 1 (system name: Coral Sea) in figure 9-16and then pressed [X], you would see the Main Menu for the switch named Coral Sea.

9-26