Monitoring and Analyzing Switch Operation

Port Monitoring Features

Move the cursor to the

Monitoring Port parameter.

Switch Operation

Monitoring and Analyzing

Figure 10-17. How To Select a Monitoring Port

5.Use the Space bar to select the port to use for monitoring, then press the downarrow key to select the Monitor parameter. (The default setting is Ports, which you will use if you want to monitor one or more individual ports on the switch.)

6.Do one of the following:

To monitor individual ports:

i.Leave the Monitor parameter set to Ports and press the downar- row key to move the cursor to the Action column for the individ- ual ports.

ii.Press the Space bar to select Monitor for each port that you want monitored. (Use the downarrow key to move from one port to the next in the Action column.)

iii.Press [Enter], then press [S] (for Save) to save your changes and exit from the screen.

To monitor all ports in a VLAN:

i.Press the Space bar to select VLAN in the Monitor parameter,.

ii.Press the downarrow keyto move to the VLAN parameter (figure 10-18 on page page 10-24).

iii.Press the Space bar again to select the VLAN that you want to monitor.

10-23

Page 329
Image 329
HP 2500 manual To monitor individual ports, To monitor all ports in a Vlan, Monitoring and Analyzing