HP 2500 manual Igmp configuration for all, VLANs on the switch, Including per-port data

Configuring Advanced Features

Configuring Advanced Features

Multimedia Traffic Control with IP Multicast (IGMP)

Viewing the Current IGMP Configuration. This command lists the IGMP configuration for all VLANs configured on the switch or for a specific VLAN.

Syntax: show ip igmp config	IGMP configuration for all
	VLANs on the switch
show ip igmp <vid> config	IGMP configuration for a
	specific VLAN on the switch,
	including per-port data

(For IGMP operating status, see “Internet Group Management Protocol (IGMP) Status” on page 10-17.)

For example, suppose you have the following VLAN and IGMP configurations on the switch:

VLAN ID	VLAN Name	IGMP	Forward with	Querier
		Enabled	High Priority
1	DEFAULT_VLAN	Yes	No	No
22	VLAN-2	Yes	Yes	Yes
33	VLAN-3	No	No	No

You could use the CLI to display this data as follows:

Figure 9-65. Example Listing of IGMP Configuration for All VLANs in the Switch

The following version of the show ip igmp command includes the VLAN ID (vid) designation, and combines the above data with the IGMP per-port configura- tion:

9-94