HP ProCurve 2500 Features, Member MAC Addresses, Advanced Configuring

Configuring Advanced Features

HP ProCurve Stack Management

You will then see the Stacking Status (All) screen:

For status descriptions, see the table on page 49.

This column lists the MAC
Addresses for switches
	Using the MAC addresses for these
discovered (in the local
subnet) that are configured	Members, you can move them between
for Stacking.	stacks in the same subnet.

Figure 9-12. Example of How the Stacking Status (All) Screen Helps You Find

Member MAC Addresses

3.In the Stacking Status (All) screen, find the Member switch that you want to move and note its MAC address, then press [B] (for Back) to return to the Stacking Menu.

4.Display the Commander’s Stack Management screen by selecting

4.Stack Management

(For an example of this screen, see figure 9-9on page 9-20.)

5.Press [A] (for Add) to add the Member. You will then see a screen listing any available candidates. (See figure 9-10on page 9-21.)Note that you will not see the switch you want to add because it is a Member of another stack and not a Candidate.)

6.Either accept the displayed switch number or enter another available number. (The range is 0 - 15, with 0 reserved for the Commander.)

7.Use the downarrow key to move the cursor to the MAC Address field, then type the MAC address of the desired Member you want to move from another stack.

Features Advanced Configuring

9-23